Du är här: Startsidan - Verktygsmaskinprober och programvara - Produktlista - RP3

RP3

Denna sida finns för närvarande inte på ditt språk. Du kan översätta den automatiskt med Google Translate. Vi ansvarar inte för att tillhandahålla denna tjänst och vi har inte kontrollerat översättningsresultaten.
Kontakta oss om du behöver ytterligare hjälp.

Sidans innehåll Nedladdningsbara filer Ring närmaste kontor Kontakta oss online

RP3 RP3 tool setting probe for HPRA, HPPA and HPMA arms.

The RP3 is also suitable for OEM installation into purpose-built holders.

About RP3

HPPA The RP3 probe is suitable for OEM installation into purpose-built holders, or for use with Renishaw''s automatic or manual tool setting arms.

A robust 5-way probe for tool setting and some inspection applications. Advanced design has produced an extremely small probe with 1µm repeatability and large over-travel.

The MI 8-4 interface is required for use with the RP3 hard-wired probe.

RP3 features and benefits

1 µm repeatability
Compatible with the full range of Renishaw M4 styli
Standard fit HP series toolsetting arm (HPRA, HPPA and HPMA)
Flexibility - OEM kit available for OEM installations
Large 9° of over-travel - increases the durability of the probe

RP3 specification

Specification
Sense directions	±X, ±Y, +Z
Weight	80 g (3 oz)
Uni-directional repeatability (max 2 sigma at stylus tip)	1.0 µm (0.00004 in)
Trigger force XY plane - lowest force XY plane - highest force +Z direction	1.5 N (5.3 ozf) 3.5 N (12.3 ozf) 12.0 N (42.3 ozf)
Stylus overtravel XY plane +Z direction	±9° 2 mm (0.08 in)
Recommended stylus length	48.75 mm (1.90 in)
Sealing	IP X8
Mounting	Refer to user's guide for customer integration details.
Compatible interface	MI 8-4